|
|
What kind of Chainsaw to buy
There are a number of options certainly a bow saw would work to trim them down and cut them up but would take some time. If you have access to electrical power you might consider an electric chain saw.
I personally I have Husqvarnas. They are a good saw for a professional but more expensive than most.
|
|
Add Photo
Bookmarks: |
|
|
|
What kind of Chainsaw to buy
Billy;
Althought Husky and Poulan are part of the same congomerate, Electrolux, they are not the same saw nor are they made in the same factory. Having used Huskies for some 30 years or more and owned Poulans for about the same period, I can say that Poulans have improved from the connection but I am not sure Husqvarna has.
Almost all the saws are made by Electrolux but Stihl.
|
|
Add Photo
Bookmarks: |
|
|
|
What kind of Chainsaw to buy
Billy;
I had noticed that the Husky saws are now less expensive and assumed it was the dollar exchange. I could see no reference the AR in the Husky site, but SC.
Stihl has been producing saws in the states for a while I guess that Husky needed to do the same to compete.
I have used both in falling on the west coast years ago, but have not used the newer Stihls, only looked at them. At the time, I started nearly 30 years ago, both saws had been in service for a number of years. The forest industry in B.C. always sought out the best.
Husky invented the antivibe systems and theses were a real God send. On a large saw after a day of running you could bearly unclench your hands.
As a kid we had an old Canadian with 36" bar that was about as loud and as pleasant as you can imagine. Your ear would ring with ear plugs in.
I am happy that some people like the Stihl. Interms of longevity it was King in the woods. As with anything there is a trade off. Power to weight was better on the Husky, but looking at the numbers now they are about the same. The main reason I like the Huskies is the balance of the saw. If you are working with the saw most of the day and packing it around it make a difference.
Yes the Stilh might last 2 years in the woods and the Huskies only one and 1/2 but the side cutting with Huskies cut more woood so most camps went with the Huskies.
|
|
Add Photo
Bookmarks: |
|
|
|
What kind of Chainsaw to buy
I agree that a good saw make a difference. Jonsered is part of the Electrolux group, like Huskies.
Keeping a file sharp is critial to not over working your self or the saw. I am afraid that I have never had a file guide. You were working falling I never had time to use a guide. I normally use just the Husky file handle as the guide. Controlling the raker depth is key to having a correct cut.
The only time I wish I had a guide or power set is when I badly rock a chain. It is often difficult to correct the mistake.
I normally use most of a chain, there is very little remaining after I am finished. Cutting hard wood takes a lot of filing.
|
|
Add Photo
Bookmarks: |
|
|
|
What kind of Chainsaw to buy
Seem sized for the job, but not sure I want to lug it around all day any more. Not much good for cutting sage brush.
|
|
Add Photo
Bookmarks: |
|
|
|
What kind of Chainsaw to buy
Mark,
I have a smaller 51 Husky and the larger 257 like Tom. I would not use that big of bar unless I had a tree 2 another 2 feet across. The last one I took down near that size was an old oak snag I had on the top of the hill in KY.
You need to have your plastic wedges handy when cutting big stuff. Save a lot of possible pinching.
Chief,
I always used the falling pants as it is easier to drop them off and cool down. I anly used the chaps once or twice but hated them. It needed to be -20 to keep cool. I wear my shorts underneith and just release the suspenders. My current pair I found in KY and the Husky ones. They are polyester and are hotter than the cotton ones I normally bought when falling. Does any one know where you can get the cotton denium ones? Ken?
Peters
|
|
Add Photo
Bookmarks: |
|
|
|
What kind of Chainsaw to buy
Ken;
The denim pants were sold in the logging supply on the west coast. I have not found them in the east. They are much cooler than the polyester and for my mind the best choice. I am not sure that I would wear the chaps, but I guess they are as safe, if you don't fall over from the heat.
Even the pants I have are a bit much in 100 F weather.
Peters
|
|
Add Photo
Bookmarks: |
|
|
|
What kind of Chainsaw to buy
I guess I never saw the use of the helment unless you are falling or it is raining. If the long bar saw kicks back at high RPM it will certainly knock it off your head or cut through it.
One of the reasons that we only worked 6 hour days falling the big stuff was that you need to have a tight grip on saw and be ever aware that it can kick at any moment.
Glad to here that the chaps worked and saved injury. After years working in the woods using my falling pants and never touching them. I cut the Husky pair cutting fire wood. I set the saw on my knee to rest and it had not stopped moving.
In some ways the smaller saws are more dangerous as people tend to use them like electric knives with one hand. Two hands and tight grip is always needed on a saw.
I tend to use chains down to their last and keep the saw sharp at all times. I file every tank when cutting hard wood. I file both cutters and rakers so their is little left of the chain when finished.
About 12-15 cord per chain is right although a little difficult to estimate as I run 2 saws and use one for limbing and the other falling and bucking.
|
|
Add Photo
Bookmarks: |
|
|
|